Geotec

Geotec is a comprehensive geotechnical, environmental and geomechanical data management software to optimize investigation campaigns from field to final reports.  Geotec uses a standardized corporate database on premises to centralize all in-situ and laboratory data from investigation campaigns. 

Geotec has comprehensive entry forms and integrated calculations from raw measurements.  Geotec also allows you to customize your graphic reports to reflect company standards.

Modules

Geotec has five modules dedicated to the exploration, design or construction phases of a project.  All five utilize the same on-premises database, optimizing your time as data are only entered once. 

Log is for generating borehole log reports - including any type of data measured in a boring : SPT, CPT, in-situ tests, lab tests results, piezometers, etc.

Lab is for generating lab reports - detailed for internal validation, single-sample report, or multiple samples on summary reports. Results are calculated from lab measurements.

Pro is for generating cross-sections. Set a line of 2 points of more, and Pro will project boreholes within a specified radius onto the axis, with properties decided by the user.

Site is for generating 2D plan views including additional information per boring, as well as 3D views with modeling based on xyz grids

Time is for generating plots to monitor water level or pressure over time from piezometer installations

Compatibility

Geotec is set to work in any workflow. All graphic reports can be generated as PDF or DXF files for AutoCAD. Import and export tools are available in all modules. 

Import from: gINT, Diggs, AGS, Excel worksheets, CSV

Export data to: Diggs, AGS, Excel worksheet, CSV, IGES for Civil 3D and Catia, georeferenced AutoCAD

To learn more: Geotec.