Back in March of 2019, RS2, our 2D finite element program received a major upgrade with the addition of NorSand as a constitutive model. This implementation made RS2 the first commercial geotechnical FEA program to include NorSand. Since then, it has been widely used among our users that work with soil.
NorSand is a generalized critical state model that accurately captures the effect of void ratio on soil behaviour. It is therefore capable of modeling static liquefaction within a sound engineering framework. A prominent feature of soil is that it exists over a spectrum of void ratio and that the actual void ratio (or relative density) affects the mechanical behavior of soil. NorSand is an appropriate constitutive model for soil in that it explains the changes in soil behavior caused by changes in its void ratio.
NorSand falls within the framework of Critical State Soil Mechanics (CSSM), with the framework’s most widely taught model being Modified Cam Clay (Roscoe & Burland, 1968). CSSM is based on two axioms: 1) the presence of a unique locus of failure that is called the “Critical State Locus” or CSL, and 2) the fact that shear strain moves soil towards the CSL.
The basic problem with Modified Cam Clay, when applied to sands, is that it cannot capture the dilation behavior that is observed for dense sands. Additionally, it is a poor predictor of the behaviour of loose sands and cannot handle liquefaction-related problems in particular. The main advantage of NorSand is the consideration of a state parameter that is the difference between the soil’s current void ratio and that of its critical state. The dilation or compaction of soil is then uniquely related to the state parameter.
NorSand has the attribute of being easily used by practical geotechnical engineers. It uses few material properties, which are easily measured in conventional laboratory tests, and can capture the many aspects of soil behaviour over a wide range of density and confining stress. The main additional parameter over what is needed to define a Modified Cam Clay model is the state parameter. In situations where accurate representation of volume change is important, the additional effort in the parameter determination is more than justified.
NorSand is a CSSM model developed for sand and originated from observations about sand behaviour in large-scale hydraulic fills (tailing dams). However, the model is particulate and applicable to any soil in which particle-to-particle interactions are controlled by contact forces and slips rather than bonds. Current applications of NorSand range from well-graded tills through sands to clayey silts.
The following images show the implementation of the NorSand model in RS2.
Source: NorSand in RS2: An Advanced Constitutive Material Model
The following was prepared by Dr. Ronald B.J. Brinkgreve, and first presented by Virtuosity. Numeri...
With an increase of tailings dam failures involving liquefaction over the past two decades, the min...
When it comes to selecting the right geotechnical software, functionality and precision are key fac...
The following was prepared by Dr. Ronald B.J. Brinkgreve, and first presented by Virtuosity. In a p...
NorSand is an advanced constitutive material model utilizing Critical State Soil Mechanics (CSSM),...
The complex relationship of stresses and strains for soils involved in the geotechnical projects a...
The following was prepared by Dr. Ronald B.J. Brinkgreve, and first presented by Virtuosity. The te...
Liquefaction is simply another facet of soil behavior, and earthquakes are by no means necessary fo...
Looking for more information? Fill in the form and we will contact Rocscience Inc. for you.