GeoSuite Geotechnical Analysis geotechnical investigations

GeoSuite© + GeoLogs©+ GeoLogs© - Advanced Geotechnical Software for Engineering Applications Bundle

Geotechnical Earthquake Engineering

US$ 695,00

GeoSuite is a comprehensive Windows based computer program particularly designed for Geotechnical Engineers. It covers most of the topics involved in the preparation of geotechnical investigation reports, such as Liquefaction Potential, Seismic Settlement, Lateral Spreading, Compression Deformation, Bearing Capacity, Subgrade Reaction Modulus, and Static and Seismic Earth Pressures.

Download Documentation

GeoSuite^© is a comprehensive geotechnical software package designed for geotechnical engineers, civil engineers and engineering geologists who need to evaluate earthquake hazard or provide various geotechnical parameters or information for structural design. All calculations are performed in an easy and understandable format and based on field geotechnical investigation data, obtained through Standard Penetration test (SPT), cone penetration test (CPT) or shear wave velocity (Vs) measurements. GeoSuite^© is a very useful tool for reviewer of geotechnical reports with a need to check the accuracy of results and calculations presented to them for review. It further allows engineers to run hypotheticals that will aid in increasing the overall understanding of the geotechnical environment.

GeoSuite^© has been in constant development since its inception in 2002 and consists of four modules:

GeoLiqu^© – Liquefaction, seismic settlement, lateral spreading analysis with exhibits
GeoComp^© – Compression deformation analysis with exhibits
GeoBP^© – Bearing pressure and subgrade reaction modulus analysis with exhibits
GeoEP^© – Static and seismic earth pressures analysis with exhibits
GeoSC© – Swell/Collapse deformation analysis with exhibits (new)
GeoLogs© – Plot soil boring logs (new)

By using GeoSuite^© you may evaluate: liquefaction potential, seismic settlement, liquefaction-induced lateral spreading, compression/consolidation deformation, expansion deformation, bearing pressures and subgrade reaction moduli considering multi-layered soil profiles. The user can also calculate static and seismic earth pressures for arbitrary surface configurations including level, ascending and/or descending sloped or stepped surfaces. The latest functions added in the program include the calculation of Liquefaction Potential Index (LPI) and Liquefaction Severity Number (LSN).

All of the above features make GeoSuite^© the premier geotechnical engineering tool on the market, also recognized by State and local Government agencies across the U.S.A.

GeoLogs© is a software specially designed and developed for Geotechnical Engineers and Engineering Geologist to plot soil boring logs using a user-friendly interface. Based on United Soil Classification System (USCS), detailed soil descriptions will be automatically added by selecting USCS symbols of the soil type. It allows users to include field and laboratory test data.

GeoLogs© is specially designed for being included in the Geotechnical Engineering Report or Geology Hazard Report. Deep boring can be seamlessly plotted into multiple pages by user specified depth per page. A summary of USCS page and a General Notes page are automatically generated and added at the end of boring log output. In a single project file, users can generate as many as number of borings.

GeoLogs© has a powerful function to create cross-sections, that is required for the project reviewed by CGS in California, by selecting inputted boring logs. By importing the output from GeoSuite, GeoLogs© can easily to create cross-section with mixed soil bring and CPT sounding data as well as to add strata to the cross-section.

GeoPile© is a software specially designed and developed for Geotechnical Engineers to calculate vertical pile capacities in accordance with AASHTO LRFD design methods. Currently it calculates vertical resistance of Drilled Shaft in accordance with AASHTO LRFD Bridge Design Specifications – 8th Edition and California Amendments to AASHTO LRFD Bridge Design Specifications – 8th Edition. Driven pile and micro pile will be added.

GeoPile© is specially designed for being included in the Geotechnical Engineering Report with its neat output. It uses the soil profile created in GeoSuite©. It will calculate shaft length of single and group pile length of various diameters for Strength Limit and Extreme Limit conditions. Group reduction factor is automatically considered based on group pile layout. GeoPile© has following functions:

Drilled shaft resistance based on AASHTO LRFD.
Driven Pile and micropile (under developing).
Detailed soil profile from GeoSuite©.
Strength and Extreme limits.
User defined shaft diameter range.
Group reduction for compression and uplift.
Pile head below excavation or within embankment (under developing).
Permanent casing.

Learn more on the software by clicking here!

For a detailed pricelist of the GeoSuite^© package and each module separately, please click here!

Category	Geotechnical Earthquake Engineering
Licence Type	Commercial
Operating Systems	Windows 10, Windows 11
Current Version	4.1.1.12
Release Date	2025-01-21 00:00:00
Developer	GeoAdvanced
Developer Website	http://geoadvanced.com/
Developer Email	[email protected]
Changelog	GeoSuite© Version History: 4.1.1.12 - 2024/11/16 For GeoSuite: • Group methods based on data type for user to select. 4.1.1.11 - 2024/10/23 For GeoSuite: • Minor update for liquefaction output. 4.1.1.10 - 2024/10/04 For GeoLogs: • Revise 2nd page USCS description location for special case. 4.1.1.9 - 2024/09/03 For GeoSuite: • Output max. lateral spreading number in plot. 4.1.1.8 - 2024/07/30 For GeoSuite: • Update method combinations. For GeoLogs: • Add boring log preview termination. • Update plotting end of boring for special cases. 4.1.1.7 - 2024/07/15 For GeoLogs: • Change font to 'Arial Narrow' for lab results in GeoLogs. For GeoSuite: • Revise to special case for Output USCS for CPT. • Fix bugs reiased by output USCS for CPT. 4.1.1.6 - 2024/06/26 For GeoLogs: • Update for modification of Boring Summary sheet. 4.1.1.5 - 2024/05/17 For GeoSuite: • Update text subscript spacing. For GeoLogs: • Add Boulder & Coble to boring log description. • Update max size description. 4.1.1.4 - 2024/04/22 For GeoSuite: • Compression output X, Y coords. 4.1.1.3 - 2024/04/15 For GeoSuite: • Update compression plot. 4.1.1.2 - 2024/04/09 For GeoLogs: • Add AC/PCC, AC/PCC/AB, PCC/AB. 4.1.1.1 - 2024/03/18 For GeoLogs - cross-section: • Showing Boring Labels on Log Input page title. • Update special case for text overlap. • Plot groundwater lines in cross section. • Update user interactive stratum lines. 4.1.1.0 - 2024/03/05 For GeoLogs - cross-section: • Add user interactive stratum lines. 4.1.0.5 - 2024/02/06 For GeoLogs - cross-section: • Add function to show multiple structures in one cross section. 4.1.0.4 - 2024/01/26 For GeoSuite: • Correct USCS vs FC dismatch caused by other changes. 4.1.0.3 - 2024/01/16 For GeoSuite: • Output USCS for CPT by reducing duplicated. For GeoLogs - cross-section: • Import CPT USCS for CPT profile 4.1.0.2 - 2024/01/11 For GeoSuite: • Output USCS for CPT based on SBTn & Yi (2014). For GeoLogs - cross-section: • Cross-section centering etc. 4.1.0.1 - 2024/01/07 For GeoLogs - cross-section: • Add X scale. • Add building location. 4.1.0.0 - 2024/01/03 For GeoLogs: • Plot cross-section for selected borings. 4.0.0.3 - 2023/12/11 For GeoLogs: • Change 'rqd=' to 'RQD=' for rock quality. 4.0.0.2 - 2023/10/25 For GeoSuite: • Revise Transition Zone Correction search. 4.0.0.1 - 2023/10/25 For GeoLogs: • Update plot for multiple layers in fill. 4.0.0.0 - 2023/10/11 Add GeoPile module. • Drilled Shaft based on AASHTO LRFD Design 8th Ed. • California Amendments to AASHTO LRFD 8th Ed. • Multiple pile diameters. • Stength limit. • Extreme limit. • Group pile layout & efficiency. • Group efficiency for compression. • Group efficiency for uplift. 3.3.0.8 - 2023/09/10 For GeoSuite: • Include interpreted parameter files to Excel output. 3.3.0.7 - 2023/08/17 For GeoSuite: • Reduce the converted φ (Mayne et al. 2001) by 5° based on direct shear test results. 3.3.0.6 - 2023/08/06 For GeoLogs: • Update plotting USCS & Bedrock. 3.3.0.5 - 2023/08/01 For GeoLogs: • Modify labels for Test Pit or Hand Auger logs. 3.3.0.4 - 2023/07/24 For GeoSuite: • Fixed one bug in recovering Mod.CAL sampelr diameter correction . 3.3.0.3 - 2023/07/12 For GeoSuite: • Fixed one bug in Y scaling of liquefaction plot. 3.3.0.2 - 2023/07/07 For GeoLogs: • Add modifier for (Coarse>30% & fine>12%) to USCS Prefix. For GeoSuite: • Bug in Japanese 'Strength Reduction Factor' for liquefied soils. 3.3.0.1 - 2023/06/26 For GeoLogs: • Update Automatically adding Relative Density/Consistancy to log. 3.3.0.0 - 2023/05/28 For GeoSuite: • Add password control to include or exclude GeoLogs. • Add preview of 'General Notes (Rock)'. 3.2.2.6 - 2023/05/14 For GeoSuite: • Fixed one typo in methods. • Fixed sampler data recovery. 3.2.2.5 - 2023/04/19 For GeoSuite: • Add option for including/excluding load cases in calculations. 3.2.2.4 - 2023/03/10 For GeoLogs: • Add borehoe diameter input for each boring. • Update titlebox for different drill rig used for each boring. • Fix titlebox margin for some special case with slided printout. 3.2.2.3 - 2023/01/19 For GeoSuite: • Update for plotting liquefaction deeper than 100 ft. • Update for boring labeling not using 'B-*'. 3.2.2.2 - 2023/01/09 For GeoSuite: • Correct soil layer shift in special case in compression plots. 3.2.2.1 - 2022/12/10 For GeoSuite: • Update static GW pressure drawing for CPT. • Save 'Add Site Class', 'Add LPI', 'Based on N or Vs' options. • Enhance Help for both GeoSuite & GeoLogs. 3.2.2.0 - 2022/11/16 For GeoSuite: • Add option for Site Class, based on Nspt or converted Vs for SPT profile. 3.2.1.9 - 2022/11/04 For GeoLog: • Add drill rig information in each boring in case multiple drill rig used. • Update USCS symbol plot for native for some special case. 3.2.1.8 - 2022/09/10 For GeoLog: • Plot combined Fill & USCS symbols. 3.2.1.7 - 2022/08/21 For GeoLog: • Add Perched Groundwater. 3.2.1.6 - 2022/08/19 For GeoLog: • Minor changes for without gravel size input. 3.2.1.5 - 2022/07/19 For GeoLog: • Plot combined bedrock & USCS symbols. 3.2.1.4 - 2022/07/18 For GeoLog: • Update combobox options. 3.2.1.3 - 2022/07/13 For GeoLog: • Add 'free water' to Moisture option. • Add Relative Proportions to soil classification. 3.2.1.2 - 2022/06/20 For GeoLog: • Add bedrock loging. • Add General Notes (Rock). • Change font size for 'Bedrock' in Remarks. For GeoSuite: • Add static pore water pressure line for CPT output. • Adjust location of 'Silt Correction' in legend. 3.2.1.1 - 2022/05/17 For GeoLog: • Update to handle special cases at end of borings. 3.2.1.0 - 2022/05/12 For GeoSuite: • Revise KEY saving. • Seismic site class based on ASCE 7-22. For GeoLog: • Add energy efficiency input option. • Automatically add Relative Density/Consistancy to log. • Revise remarks print out. • Enhance log output. 3.2.0.6 - 2022/03/29 For GeoLog: • Disable 'Sort' function in boring log data input. 3.2.0.5 - 2022/03/02 For GeoLog: • Fix bug for Hand Auger & Test Pit log title. 3.2.0.4 - 2022/02/02 For GeoLog: • Remove '(1 of 1)' in Boring Log enclosure numbering. 3.2.0.3 - 2022/01/18 For GeoSuite: • Fix extrimely low qt data (qt<σvo) to avoid error. 3.2.0.2 - 2022/01/15 For GeoLog: • Fixed last stratification line for special case in GeoLog. 3.2.0.1 - 2021/12/20 For GeoSuite: • Fixed Max. lateral spreading depth. 3.2.0.0 - 2021/10/28 For GeoSuite: • Add Yi (2022)[CPT] for CPT dry sand settlement. • Calculate & output dry sand settlement for other methods. 3.1.0.6 - 2021/10/23 For GeoLog: • Add warming for boring numbers don't match. • Updated 'General Notes' for GeoLog. 3.1.0.5 - 2021/08/29 For GeoLog: • Update Boring Log plot: 1) Output particle size, relative density, consistancy, field moistur etc. in the middle soil layer. 3) Update for single simple layer. 4) Output backfill information. 5) Add Figur No. style: Figure 'B3 (1 of 2)' and Figure '3 (1 of 2)'. 6) Fix page break at middle of layer. 7) Add prefix for bedrock. 3.1.0.4 - 2021/08/11 For GeoLog: • Update Boring Log plot: 1) add inch to blowcount for blows in <6in. 2) plot elevation scale for non-whole number surface EL. 3) fixed one bug for adding 'additional notes'. 4) added 'with fine sand' to suffix. 3.1.0.3 - 2021/07/21 For GeoSuite: • Add liquefaction criteria for clay-like soil based on PI and LL. (incomplete) 3.1.0.2 - 2021/06/28 For GeoSuite: • Remove 0 depth CPT data. 3.1.0.1 - 2021/06/13 For GeoSuite: • Update Transition zone hangup caused by some CPT data. 3.1.0.0 - 2021/06/03 For GeoSuite: • Add Punching Shear Capacity for Liquefied Soil Profile. • Update XY plots. 3.0.0.5 - 2021/05/19 • Add option for dashline for soil layer in GeoLogs. • Update for page break of boring log. 3.0.0.4 - 2021/05/05 • GeoLogs update. • Add Residual Bearing Capacity for Liquefied Soil Profile. 3.0.0.3 - 2021/04/01 • Add initial subgrade reaction modulus in output. 3.0.0.2 - 2021/03/30 • Add unit weight and c & Phi of fill to Load Data 3.0.0.1 - 2021/03/20 • Add GeoLogs module for ploting soil boring logs, including: 1. Boring summary input, 2. Input of each boring log data, 3. Review of boring log, 4. Unified Soil Classification Sysytem summary sheet, 5. Sheet of General Notes, and 6. Print preview and print of logs. 2.5.0.4 - 2021/02/15 • Fix bug for SF50 & SF85 for Ic>2.6. • Add folder tree to import dialog. • Modify sampler sizes. 2.5.0.3 - 2020/09/28 • Fix bug for SPT Correction for Other Driller. 2.5.0.2 - 2020/09/17 • For shallow profile, calculate and output for footing width 1, 2, 3, 4, 5, 6. 2.5.0.1 - 2020/08/08 • Add Swell/Collapse function • Add full subgrid option for XY plots 2.4.3.5 - 2020/03/16 • Fix typos • Fix 'Silt correction' label location • Improve transition-zone Auto Detection 2.4.3.4 - 2020/03/16 • Fix bugs for Sum Vs raised by adding output parameters 2.4.3.3 - 2019/12/30 • Add updated liquefaction potential index(LPIish) by • Maurer et al. (2015) 2.4.3.2 - 2019/10/10 • Fix bugs for Vs raised by adding output parameters • Fix bugs for subgrade reaction modulus unit conversion 2.4.3.1 - 2019/08/21 • Add Robertson (2009) method for CPT • Add Robertson (2004) method for CPT • Update ground improvement based on Rayamajhi et al. (2014) • Add Pre-CPT Ic to ground improvement • Update Ic+∆Ic to ground improvement 2.4.3.0 - 2019/04/11 • Update output for CPT and Vs for various methods • Add Strength Reduction Factor, De for liquefied layer 2.4.2.21 - 2019/02/06 • Update fine content correction for settlement 2.4.2.20 - 2019/01/18 • Fix a bug in Ground Improvement • Update ground improvement for known column Gc 2.4.2.19 - 2019/01/07 • Update default methods for calculations. 2.4.2.18 • Enforce end if file access is denied. 2.4.2.17 • Fix a bug in reading compression results when no result file. 2.4.2.16 • Change subgrade reaction modulus unit from kcf to pci 2.4.2.15 • Update CPT Transition-zone Auto Detection 2.4.2.14 • Update silt settlement • Add UCLA fines correction to liquefaction-induced settlement 2.4.2.13 • Update fill color for plotting data on SBT 2.4.2.12 • Update Transition zone detection 2.4.2.11 • Show consistency in Relative Density (Dr) plot 2.4.2.10 • Fix a bug when lateral displacement is not calculated 2.4.2.9 • Fix a bug in CSR/CRR graph 2.4.2.8 • Add fLDI limits • Output fLDI in title 2.4.2.7 • Move LDI column location in output 2.4.2.6 • Change decimals for SI unit • Default ∆Ic=0.1 in transition zone detection 2.4.2.5 • Update table column width for Windows scaled text 2.4.2.4 • Add 'Exhibit' to figure numbering 2.4.2.3 • Fix plotting (-) u2 for CPT in SI unit 2.4.2.2 • Update additional CPT layer at GW depth 2.4.2.1 • Add CPT interval average method • Add Tooltip to options • Change SBT difference from 3 to 2 in advanced average 2.4.2.0 • Add Boulanger & Idriss (2010-2016) methods for SPT and CPT • Add probability for Boulanger & Idriss (2010-2016) methods • Plot probability FS for Boulanger & Idriss (2010-2016) methods • Update CPT calculation • Soil permeability (k) for CPT • Add maximum lateral spreading depth • Update transition zone correct • Separate CPT option & Lateral Spreading option data • Add UCLA fine correction for silt soil • Output LDI • Plot both LDI & ∑Di • Plot original qc & thinlayer corrected qc • Update to plot (-) u2 for CPT • Only show LSN for CPT data 2.4.1.6 • Add version history logs 2.4.1.5 • Developed under Microsoft Visual Studio 2017 • Adjust for screen scale 2.4.0.18 • New Unit weight by Robertson (2010) CPT • New Fine Contents by Yi (2014) CPT • Transition zone correction • Thin layer correction • Ground improvement • Perched Aquifer 2.4.0.15 • Developed under Microsoft Visual Studio 2015 • Output And plot induced lateral stresses, Δσx And Δσy 2.2.2.8 • Revise system time checking 2.2.2.7 • Change to New data format for Kehoe's CPT data 2.2.2.6 • Correct bug for 'Clear All' in soil profile input sheets 2.2.2.5 • Save Option parameters for 2D contour plot 2.2.2.4 • Move Label position in liquefaction analysis plot if it's too shallow 2.2.2.3 • Correct CE for N60 input. • Remove line legend in plot area, draw line legend under X title label 2.2.2.2 • Add Email Or Text mail options To allow user use text even Microsoft Outlook Is installed in PC. 2.2.2.0 • Control modules by key 2.2.1.9 • Handle negative tip resistance CPT data 2.2.1.8 • Update Gregg Drilling New data format 2.2.1.7 • Fixed bugs 2.2.1.6 • Redirect help links • Fixed bugs 2.2.1.2 • Added auto download 2.2.1.1 • Added Liquefaction Potential Index (LPI) developed And presented by Iwasaki (1978, 1982) • Added Liquefaction Severity Number (LSN) proposed by Tonlin & Taylor (2013) 2.2.1.0 • Added 2D contour for user data such as settlement distribution

This feature is only available for software listings at the Advanced or Lead Sponsorship Level. Each software provider can upgrade the sponsorship level of their software listing by visiting the sponsorship levels page.