Steel Rods manufacturing for the construction of Rion-Antirion Bridge
Contents [show]
Photos provided by G. Konstantakopoulos, N. Stathopoulos, J. Simeonoglou.
Texts by G. Konstantakopoulos.
Photo taken in October 2001.
Machine used to automate the shaping of the reinforcements in the shape required by the design.
Steel rods to be used in the above machines. A label with the barcode described the technical characteristics of the reinforcement that are going to be used to.going to be used to.
Machine used to automate the shaping of the reinforcements in the shape required by the design. Used for steel rods of smaller diameter. The user has specified the geometric characteristics of the steel rod. On the left you can see the steel rod which is inserted in the machine to be shaped.
Selected Topics
See Also
What is Geotechnical Engineering?
Jun, 25, 2020Geotechnical Engineering has been - throughout th...
Eurocode 7: Past, Present, and Future - ISSMGE Lecture
Apr, 28, 2020In this 2011 lecture, Dr. Andrew Bond of Geocentr...
Shaft Foundations
May, 29, 2019Drilled shafts, also referred to as drilled piers...
Soil Subgrade Reaction in Rigid Foundations
Sep, 22, 2020Introduction For rigid foundations, the analytica...
3D Modeling of Soil-Foundation-Structure Interaction: Case History at Fly Ash Silo, Maasvlakte Rotterdam
Sep, 14, 2020Note: This Case History was first presented in Pl...
Soil Subgrade Reaction
Sep, 04, 2020Introduction The interaction between a foundat...
