| Program Name: |
RAPID CPT
| Developer/Owner: |
Dataforensics
| Contact name: |
Katie Aguilar
| Contact e-mail: |
| World Wide Web Address: |
WinNT, Win2000, WinXP
| Platform: |
Site Characterization
| Category: |
| Program description: |
RAPID CPT - A gINT Add-in that imports raw CPT data, automatically calculates more than 35 correlations, and
generates fully customizable CPT reports.
It imports CPT data from the raw text files from the following CPT manufacturers:
It supports importing raw data in both English (Imperial) and metric units.
RAPID CPT performs most typical CPT evaluations including normalized and non-normalized soil behavior type
(SBT) based on friction ratio or pore pressure, density, relative density, void ratio, effective friction angle,
constrained modulus, coefficient of lateral earth pressure, undrained shear strength, over consolidation ratio,
sensitivity, fines content and equivalent (N1)60. The standard report has qt, fs, pore pressure, friction ratio,
Soil Behavior Type and either shear wave velocity or equivalent (N1)60. A dynamic report allows the user to
chose up to 6 parameters to be plotted. In addition there are fence diagrams, and parameter overlays.
generates fully customizable CPT reports.
It imports CPT data from the raw text files from the following CPT manufacturers:
- Vertek files (.ecp) and (.dat)
- Hogentogler Digital files (.cpt)
- Hogentogler Analog files (.cpd)
- Geotech AB and Envi AB files (.cpt)
- Geotech AB and Envi AB files (.cpd)
- AP van den Berg files (Gorilla)
- Gregg Drilling files (.cor)
- Conetec files (.cor)
- GEF Files
- AGS Files
- Excel
It supports importing raw data in both English (Imperial) and metric units.
RAPID CPT performs most typical CPT evaluations including normalized and non-normalized soil behavior type
(SBT) based on friction ratio or pore pressure, density, relative density, void ratio, effective friction angle,
constrained modulus, coefficient of lateral earth pressure, undrained shear strength, over consolidation ratio,
sensitivity, fines content and equivalent (N1)60. The standard report has qt, fs, pore pressure, friction ratio,
Soil Behavior Type and either shear wave velocity or equivalent (N1)60. A dynamic report allows the user to
chose up to 6 parameters to be plotted. In addition there are fence diagrams, and parameter overlays.
RAPID CPT
| Want to be informed of updates for FREE? |
Geoengineer.org Website
| Center for Integrating Information on Geoengineering |