The International Information Center for Geotechnical Engineers

Laboratory Testing

An effective stress based shear strength criterion for unsaturated compacted double-porosity clays
A. Ferrari,C.-Airò Farulla,M. Rosone. (2015).
Application of Automation in Geotechnical Testing
R. Hankour. ().
Excavation with stepped-twin retaining wall: Model tests and numerical simulations
Y.D.S. Geraldni,M. Niinomi,T. Nakai,F. Zhang,H.M. Shahin,N. Iwata. (2008).
Stability analysis of masonry of an old tunnel by numerical modelling and experimental design
M. Alhieb,T. Verdel,J. Idris. (2008).
Mechanical behavior of closely spaced tunnels — laboratory model tests and FEM analyses
H.W. Huang,J.H. Du. (2008).
Experimental study on compressibility behavior of foamed sandy soil
M. Ahmadi-adli,H. Katebi,H. Sabetamal,M. Hajialilue-Bonab. (2008).
Influence of underground excavation on compensation grouting in clays; small-scale laboratory experiments
K. Soga,M.T. Cheong. (2005).
Effect of multiple injection on long-terrn compensation grouting - Laboratory and numerical studies
M.D. Bolton,K. Soga,S.K.A. Au. (2002).
Experimental Studies for the prevention of heaving
Y. Shioi,K. Kumagai,T. Kawasaki. (2002).
Shallow compressed air tunnelling: Field measurements and a laboratory test
S. Semprich,G. Kammerer. (1999).
Formation Fracturing by Pore Pressure Drop (Laboratory Study)
S. Turuntaev,O. Melchaeva,E. Zenchenko. (2013).
Comparison of Hydraulic and Conventional Tensile Strength Tests
M. Molenda,F. Stöckhert,S. Brenne, Alber. (2013).
Scale Model Simulation of Hydraulic Fracturing for EGS Reservoir Creation Using a Heated True-Triaxial Apparatus
L. Frash,M. Gutierrez,J. Hampton. (2013).
Three Dimensional Forms of Closely-Spaced Hydraulic Fractures
J. Kear,Ju White,A.P. Bunger,R. Jeffrey,M-A Hessami. (2013).
Blue Shift in the Spectrum of Arrival Times of Acoustic Signals Emitted during Laboratory Hydraulic Fracturing
A.V. Dyskin,E. Pasternak,A.P. Bunger,J. Kear. (2013).
Soil-Geosynthetic interface shear strength by simple and direct shear tests
L. Caldeira,M.L. Lopes,C.S. Vieira. (2013).
Application of The Tangent Modulus Method in Nonlinear Settlement Analysis of Sand Foundation
E.-Q. Wang,Y.-C. Zhang,Y.-D. Luo,G.-H. Yang. (2013).
Understanding the effects of high temperature processes on the engineering properties of soils
A. Tarantino,M. Karstunen,C. Switzer,S.G. Zihms. (2013).
THM simulations for laboratory heating test and real-scale field test
Y. Kurimoto,T. Nishimura,F. Zhang,Y.L. Xiong. (2013).
One-dimensional compressive behaviour of reconstituted clays under high temperature and small strain rate
H. Tanaka,A. Tsutsumi. (2013).
Determination of the thermal parameters of a clay from heating cell tests
X.L. Li,J. Vaunat,A. Gens,A. Lima,E. Romero. (2013).
Effect of environmental conditions on the mechanical properties of geothermal well cement paste
S. Ghabezloo,C. Kréziak,F. Martineau,E. Nauleau. (2013).
Measuring soil thermal properties for use in energy foundation design
W. Powrie,F.A. Loveridge,J.E. Low. (2013).
Analysis of the freeze thaw performance of geothermal heat exchanger borehole grout materials
S. Rochée,F. Clauss,R. Katzenbach. (2013).
Simplified Prediction of Changes in Shear Strength in Geotechnical Use of Drinking Water Sludge Road foundation construction using lightweight tyre bales
H. Komine,Y. Watanabe. (2013).
Comparing the properties of EPS and glass foam mixed with cement and sand
R. Ahmedov,E.Y. Tuncel,B. Teymur. (2013).
Experimental reinforced soil walls built with recycled construction and demolition waste (RCDW)
E.M. Palmeira,E.C.G. Santos. (2013).
Utilization of waste copper slag as a substitute for sand in vertical sand drains and sand piles
T. Rathnaweera,A. Senanayake,U.P. Nawagamuwa. (2013).
Effect of dredge soil on the strength development of air-foam treated lightweight soil
M. Nakajima,R. Tomita,M. Tanaka,T. Horita,S. Kataoka. (2013).
Technical and Economic Analysis of Construction and Demolition Waste Used in Paving Project
G. Maia,A. Gusmão,S. Fucale,A. Farias. (2013).

The Corporate Sponsors: