The Geopier SRT® system was selected by the Ohio Department of Transportation (ODOT) to stabilize three slides that occurred along the east and west sides of the OH-30W to OH-23 S interchange embankments in Wyandot County, Upper Sandusky, Ohio. The three slides had dimensions of: (1) 116 feet by 50 feet, (2) 120 feet by 72 feet, and (3) 84 feet by 60 feet. The slopes had inclinations ranging from 1.7H:1V to 2H:1V. Plate Piles were selected over traditional earthwork method.
SubsurfaceConditions: The subsurface conditions beneath the slope consist primarily of lean clay fill (placed in 2004) overlying native sandy silt. The depth of sliding for the three slides ranges from 4 to 8.5 ft.
Geopier Solution: The Geopier SRT system utilizes the patented Plate Pile method to rapidly and economically stabilize landslides that occur on sites with difficult access, or sites that require minimal environmental disturbance. The Geopier SRT system is a slope stabilization method that consists of driving steel Plate Pile™ elements through an active slide mass or a potentially unstable soil layer to penetrate underlying stable materials. The piles consist of steel sections to which rectangular plates are welded. At the ODOT Slope Stabilization project, the installation of 766 Plate Piles to depths of 12 ft was completed in June and July of 2016. Prior to Plate Pile installation, the embankment was track-rolled to form the final slope contours; no major grading was required. The Plate Piles were installed with a 3-man crew and two pieces of equipment (a mini-excavator and 300 series Caterpillar excavator). Because of the small, mobile equipment, installation could occur directly on the embankment slopes; no benching or lane closure was required. This project demonstrated that SRT system can successfully be installed along roadways, while decreasing construction time and earthwork operations.
Rread more about the Case histori here.
Source: http://www.geopier.com/Geopier-Systems/Slope-Reinforcement-Technology
Source: http://www.geopier.com/Geopier-Systems/Slope-Reinforcement-Technology
The Geopier Slope Reinforcement Technology (SRT) system allowed a cost effective repair that requir...
The Geopier SRT® system allowed a quick response and cost effective repair that required no earthwor...
The Geopier SRT® system is the most efficient and cost-effective solution to stabilize slides up to...
The Geopier SRT® system is an efficient and cost-effective solution for stabilizing new slopes and...
The Ohio Department of Transportation (ODOT) concurrently had funded a research project on large di...
Geopier is using the Impact® system to mitigate liquefaction settlement in the City of Long Beach...
A YMCA building and pool foundation were designed on grouted micropiles due to a layer of organic c...
A 5 foot 6 inch thick slab of concrete was not a good enough foundation for this seismic zone. Lear...
Learn how Geotechnical Engineers use valuable jobsite data to validate their recommendations for de...
Looking for more information? Fill in the form and we will contact Geopier, a division of CMC for you.