Most of the following 10 papers (and of other relevant papers) are downloadable from the website:
http://www.marchetti-dmt.it/
1. Technical Committee TC16 (2001) "The DMT in Soil Investigations". A Report by ISSMGE's TC16, 41 pp.
2. ASTM D6635-01 (2002) "Standard Test Method for Performing the Flat Plate Dilatometer". Book of Standards Vol. 04.09, 15 pp.
3. Eurocode 7, (1997) "Geotechnical Design. Part 3 : Design assisted by field tests, Flat Dilatometer Test (DMT)".
4. Marchetti S. (2002) "The Flat dilatometer". Lecture at 3rd Croatian Conf. On Soil Mechanics and Geot. Engineering, Hvar, 36 pp.
5. Marchetti, S. (1980) "In Situ Tests by Flat Dilatometer". Journal of the Geotechn. Engineering Division, ASCE, Vol. 106, No. GT3,
Proc. Paper 15290, pp. 299-321.
6. Totani, Calabrese, Monaco (1998)."In situ determination of Ch by Flat Dilatometer (DMT)". Proc. First Intnl Conf. on Site
Characterization ISC '98, Atlanta, Georgia (USA), pp. 883-888.
7. Robertson, P.K., Davies, M.P. & Campanella, R.G. (1987) "Design of Laterally Loaded Driven Piles Using the Flat Plate
Dilatometer". Geotechn. Testing Jnl, Vol. 12, No. 1: pp. 30-38.
8. Schmertmann, J.H.et al.(1986) "CPT/DMT Quality Control of Ground Modification at a Power Plant". Proc. In situ '86 ASCE Spec.
Conf. Virginia Tech, Blacksburg, VA, pp. 985-1001.
9. Reyna, F. & Chameau, J.L. (1991) "Dilatometer Based Liquefaction Potential of Sites in the Imperial Valley". 2nd Int. Conf. on
Recent Advances in Geot. Earthquake Engrg. and Soil Dyn. St. Louis. May, 7 pp.
10. Iwasaki K. et. al (1991) "Applicability of the Marchetti Dilatometer Test to Soft Ground in Japan". GEOCOAST '91, Sept. 1991,
Yokohama 1/6, 4 pp.
http://www.marchetti-dmt.it/
1. Technical Committee TC16 (2001) "The DMT in Soil Investigations". A Report by ISSMGE's TC16, 41 pp.
2. ASTM D6635-01 (2002) "Standard Test Method for Performing the Flat Plate Dilatometer". Book of Standards Vol. 04.09, 15 pp.
3. Eurocode 7, (1997) "Geotechnical Design. Part 3 : Design assisted by field tests, Flat Dilatometer Test (DMT)".
4. Marchetti S. (2002) "The Flat dilatometer". Lecture at 3rd Croatian Conf. On Soil Mechanics and Geot. Engineering, Hvar, 36 pp.
5. Marchetti, S. (1980) "In Situ Tests by Flat Dilatometer". Journal of the Geotechn. Engineering Division, ASCE, Vol. 106, No. GT3,
Proc. Paper 15290, pp. 299-321.
6. Totani, Calabrese, Monaco (1998)."In situ determination of Ch by Flat Dilatometer (DMT)". Proc. First Intnl Conf. on Site
Characterization ISC '98, Atlanta, Georgia (USA), pp. 883-888.
7. Robertson, P.K., Davies, M.P. & Campanella, R.G. (1987) "Design of Laterally Loaded Driven Piles Using the Flat Plate
Dilatometer". Geotechn. Testing Jnl, Vol. 12, No. 1: pp. 30-38.
8. Schmertmann, J.H.et al.(1986) "CPT/DMT Quality Control of Ground Modification at a Power Plant". Proc. In situ '86 ASCE Spec.
Conf. Virginia Tech, Blacksburg, VA, pp. 985-1001.
9. Reyna, F. & Chameau, J.L. (1991) "Dilatometer Based Liquefaction Potential of Sites in the Imperial Valley". 2nd Int. Conf. on
Recent Advances in Geot. Earthquake Engrg. and Soil Dyn. St. Louis. May, 7 pp.
10. Iwasaki K. et. al (1991) "Applicability of the Marchetti Dilatometer Test to Soft Ground in Japan". GEOCOAST '91, Sept. 1991,
Yokohama 1/6, 4 pp.
| Want to be informed of updates for FREE? |
Top 10 papers on the Flat Dilatometer
by Professor S. Marchetti
by Professor S. Marchetti
| list compiled in January 2003 |
| HAVE YOUR BANNER HERE! Click for more |
Copyright © 2003-2007 Elxis s.a. All rights reserved.
| Copyright © 2004 - 2007 Elxis s.a. All rights reserved. |
 | |  | |  | |  | |  | |  | |  | |  | |  | |  |