RetWall - Stabilty, settlement, and structural design of Retaining Walls: caters
to the general needs for the design of retaining wall (cantilever or gravity)
with a geotechnical engineering flavor.
LatPilePro - F.E. analysis/design of Shoring of deep excavations (anchored or
braced): a powerfull F.E. based program for the design/ analysis of flexible
retaining structures.
LGSoft TWallDesign v1.1 - Static and dynamic analysis of cantilever walls:
evaluates the external stability of reinforced concrete cantilever walls under
both static and seismic conditions.
LGSoft NLinearSection v1.1 - Stress-strain calculation for reinforced concrete
sections: a numerical solver that calculates both the stress and strain
distribution on a reinforced concrete section.
Cantilever wall (Fine): The program is used to verify cantilever wall design. It
offers a number of wall shapes and provides verification of reinforced
concrete cross-sections.
Gravity wall (Fine): The program is used to verify gravity wall design. It offers
a number of wall shapes and provides verification of plain concrete cross-
sections.
Prefab wall (Fine): The program is used to verify the wall made from
prefabricated blocks.
Gabion (Fine): The program is used to verify the design of walls built from
wired baskets filled with stone (gabions). It allows analysis of arbitrary
shapes of structures including overhangs requiring anchoring.
Sheeting design (Fine): The program is used to design sheet piled structures.
It provides required pile embedment lengths (for fixed and hinged heels) and
anchor forces.
Sheeting check (Fine): Program allows you to analyze sheet piled structures
(anchored, strutted and non-anchored structures) employing the method of
dependent pressures – magnitudes of pressures acting upon a structure
depend on structure deformation.
Abutment (Fine): The program provides facilities to verify abutment design.
Nailed slopes: The program analyses nailed walls and slopes of various
shapes.
Redi Rock Wall (Fine): is used to design and check a retaining walls made
from blocks produced by Redi-Rock, Inc (USA). The program is developed as a
part of GEO5 software and includes freeware versions of programs Slope
stability and Spread footing.
to the general needs for the design of retaining wall (cantilever or gravity)
with a geotechnical engineering flavor.
LatPilePro - F.E. analysis/design of Shoring of deep excavations (anchored or
braced): a powerfull F.E. based program for the design/ analysis of flexible
retaining structures.
LGSoft TWallDesign v1.1 - Static and dynamic analysis of cantilever walls:
evaluates the external stability of reinforced concrete cantilever walls under
both static and seismic conditions.
LGSoft NLinearSection v1.1 - Stress-strain calculation for reinforced concrete
sections: a numerical solver that calculates both the stress and strain
distribution on a reinforced concrete section.
Cantilever wall (Fine): The program is used to verify cantilever wall design. It
offers a number of wall shapes and provides verification of reinforced
concrete cross-sections.
Gravity wall (Fine): The program is used to verify gravity wall design. It offers
a number of wall shapes and provides verification of plain concrete cross-
sections.
Prefab wall (Fine): The program is used to verify the wall made from
prefabricated blocks.
Gabion (Fine): The program is used to verify the design of walls built from
wired baskets filled with stone (gabions). It allows analysis of arbitrary
shapes of structures including overhangs requiring anchoring.
Sheeting design (Fine): The program is used to design sheet piled structures.
It provides required pile embedment lengths (for fixed and hinged heels) and
anchor forces.
Sheeting check (Fine): Program allows you to analyze sheet piled structures
(anchored, strutted and non-anchored structures) employing the method of
dependent pressures – magnitudes of pressures acting upon a structure
depend on structure deformation.
Abutment (Fine): The program provides facilities to verify abutment design.
Nailed slopes: The program analyses nailed walls and slopes of various
shapes.
Redi Rock Wall (Fine): is used to design and check a retaining walls made
from blocks produced by Redi-Rock, Inc (USA). The program is developed as a
part of GEO5 software and includes freeware versions of programs Slope
stability and Spread footing.
| Want to be informed of updates for FREE? |
| HAVE YOUR BANNER HERE! Click for more |
| Center for Integrating Information on Geoengineering |
| SPONSOR'S LISTING |
| SPONSOR'S LISTING |
Retaining Walls Software Listing
| SPONSOR'S LISTING |
| SPONSOR'S LISTING |
| SPONSOR'S LISTING |
| SPONSOR'S LISTING |
| SPONSOR'S LISTING |
| SPONSOR'S LISTING |
| Copyright © 2004 - 2007 Elxis s.a. All rights reserved. |
 | |  | |  | |  | |  | |  | |  | |  | |  | |  |
| THANKS TO OUR SPONSOR: Special thanks to our sponsor Fine Software. Fine provides powerful software solutions for retaining wall design, foundation design, stability analysis, sheet piling and underground structures. |